Oneida 5hp High Vacuum SMART Boost 55 Gal. Freestanding Cyclone Dust Collector
Couldn't load pickup availability
High static air pressure system for CNC, sanding, and other fine dust applications. Equipped with SMART Boost® technology that doubles airflow performance through smaller 2.5" to 4" ports. Complete system includes heavy-gauge steel cyclone separator, U.S. made motor, modular cartridge filters, angle iron stand, 55 gallon dust bin, remote control, and more.
High Vacuum Pressure Dust Control for Industrial CNC Cutting Tools
Primarily designed for CNC applications, this High-Vacuum dust collection system uses Oneida Air Systems' patented SMART Boost® technology to provide roughly twice the static pressure of standard dust collectors and pull maximum CFM at the cutter head. This increased suction performance means higher quality cuts, increased cutter life and less clean up.
Traditional dust collector fan motors operate at a fixed speed (RPM). When long ducting runs, smaller tool ports, and even closed gates limit the volume of air (CFM) the fan can move at its fixed speed, the motor ends up doing less work – and draws fewer amps. Our unique SMART Boost technology ensures the motor is always working at full capacity (with a constant amp draw) by increasing fan speed as needed to deliver maximum CFM and maximum suction at all times – up to double the CFM and suction of traditional, fixed RPM dust collectors. It’s truly revolutionary!
This high pressure system is ideal for use with any type of CNC cutting tools as well as saws, jointers, lathes, shapers, planers, routers, sanders, and more!
Included Features & Components
- Industrial 5HP U.S. Made Fan Blower Motor
- SMART Boost Variable Speed Airflow Controller
- Wireless Radio Frequency Remote Control Keyfob
- Single-Piece, Smooth-Wall, Molded Fan Housing
- Heavy-Gauge Seam Welded Steel Cyclone Separator
- High-Efficiency Modular Cartridge Filters
- Internal Foam Silencer
- Heavy-Duty Angle Iron Frame Stand
- 55-Gallon Reinforced Steel Dust Bin
- Automatic Bin Fill Level Indicator
- D.I.Y. Ductwork Design Guide
- 2 Year Limited Warranty
Specifications
| SKU | XXS050333 |
|---|---|
| Horsepower | 5 hp |
| Motor Type | U.S. TEFC Motor |
| Motor Service Factor | 1.15 |
| Voltage | 208-230V |
| Recommended Breaker Size | 30A |
| Amperage (Typical) | 15A |
| Phase Option | Three-Phase (Pre-Wired) |
| Frequency | 60Hz |
| Power Connector Type |
4 Bare Wires
|
| Impeller Type | Single-piece, backward inclined, non-sparking/non-ferrous |
| Impeller Size | 15" Dia. |
| Real CFM Rating | 1,976 Actual CFM at 3.6" WC |
| Maximum Suction | 23" WC |
| Noise Level | 86-88 dBA @ 10 ft |
| Cyclonic Separation Efficiency | Removes over 99% of fine wood dusts |
| Filter Type | Izumi Axtar Spunbond Media |
| Filtration Efficiency | 99.9% @ 0.2-2.0 microns |
| Total Filtration Area | 220 sq ft |
| Waste Capacity | 55 Gallons |
| Remote Control | Included |
| Primary Build Materials | Cold Rolled Steel |
| Welding | Seam Welded |
| Static Resistance Rating | Conductive (Metal) |
| Color | White |
| Inlet Size | 7" Dia. |
| Outlet Size | Square ID: 7-3/8"(W) x 6-3/8"(H) |
| Discharge Size | 9" Dia. |
| Height to Center of Inlet | 79" |
| Actual Weight | 494 |
| Contents | Blower Motor Assembly, Variable Speed Driver, Magnetic Starter, Remote Control, Fan Housing, Cyclone Separator, Filter Plenum Assembly, 2x FlameGuard Cartridge Filters, 2x Internal Silencers, Stand, Drum, Dust Bin Level Sensor, Hardware |
| Manufacturer | Oneida Air Systems |
| Manufacturer Statement | Made in USA |
| Warranty Information | 2 Year Limited Warranty |
| Certifications | Complete system is cETLus certified for indoor use |
| Proposition 65 | WARNING: This product may expose you to chemicals, including Nickel (metallic), which is known to the State of California to cause cancer or birth defects or reproductive harm. |